Productos Urologos De Mexico, S.a. De C.v.

Productos Urologos De Mexico, S.a. De C.v. Drugs

• Prevail-fx One Step
  

  ×

  Prevail-fx One Step

  

  ---

  Directions

  to reduce the risk of fire the following strategies are recommended: at the end of prep, discard any portion of the solution which is not required to cover the prep area. It is not necessary to use the entire amount available. use in a well ventilated area avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry. do not allow solution to pool tuck prep towels to absorb solution, and then remove remove wet materials from prep area drape after solution is completely dry Hold the bottle in an upright position Twist the applicator head in the direction of the arrow until it stops Firmly push the applicator head down into the bottle until a snap is heard Invert bottle and gently squeeze to dispense solution Once applicator sponge has been primed with solution, do not continue to squeeze the bottle. When applicable, press cotton-tipped swab securely against impregnated applicator head to wet, then clean umbilicus Apply thin, even coat to operative site. Do not blot If applying prep to a tight area (e.g., neck, skin folds), insert prep towels underneath to absorb excess solution Remove any excess prep with absorbent towels or gauze Discard prepping materials, including solution soaked materials Wait until prep is dry (3 minutes or more) on skin before draping or using ignition sources Remove with high pH-level soap and water

  Close
  More Info
• Prevail One Step
  

  ×

  Prevail One Step

  

  ---

  • to reduce risk of fire the following strategies are recommended: ∘ at the end of prep, discard any portion of the solution which is not required to cover the prep area. It is not necessary to use the entire amount available. ∘ use in a well ventilated area ∘ avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry. ∘ do not allow solution to pool ∘ tuck prep towels to absorb solution, and then remove ∘ remove wet materials from prep area ∘ drape after solution is completely dry • Hold the bottle in an upright position • Twist the applicator head in the direction of the arrow until it stops • Firmly push the applicator head down into the bottle until a snap is heard • Invert bottle and gently squeeze to dispense solution • Once applicator sponge has been primed with solution it is not necessary to continue to squeeze the bottle • When applicable, press cotton-tipped swab securely against impregnated applicator head to wet, then clean umbilicus • Apply thin, even coat to operative site • If applying prep to a tight area (e.g., neck, skin folds), insert prep towels underneath to absorb excess solution • Remove any excess prep with absorbent towels or gauze • Discard prepping materials, including solution soaked materials • Wait until prep is dry (3 minutes or more) on skin before draping or using ignition sources • Remove with soap and water

  Close
  More Info
• Scrub Care
  

  ×

  Scrub Care

  

  ---

  • wet hands and forearms to the elbows • clean under nails with pick provided • wet sponge and squeeze to work up lather • scrub thoroughly for 3 minutes. Use the brush side to clean the nails, cuticles, and interdigital spaces between the fingers and the sponge side to scrub the hands and forearms. • rinse thoroughly • scrub for an additional 3 minutes using the sponge side only. Wet sponge and squeeze to produce additional lather. • rinse thoroughly and dry with a sterile towel

  Close
  More Info
• Scrub Care
  

  ×

  Scrub Care

  

  ---

  • clean under nails with nail pick. Nails should be maintained with a 1 millimeter free edge • wet hands and forearms with water • scrub thoroughly for 3 minutes with the impregnated brush • pay particular attention to the nails, cuticles, and interdigital spaces • rinse thoroughly with running water • repeat

  Close
  More Info