Smg Pharmaceuticals, Llc

Smg Pharmaceuticals, Llc Drugs

• Bensal Hp
  

  ×

  Bensal Hp

  

  ---

  Patients should be advised to follow these step-by-step instructions for application of Bensal HP® Ointment:

  Hands should be washed thoroughly.

  When using tubes, the tip of the tube should not come into contact with the area to be treated; the tube should be recapped tightly after each application.

  If applying with a cotton-tipped applicator, which is recommended, use once and discard.

  Bensal HP® Ointment should be applied twice a day for best results.

  Gently rinse the area to be treated with saline or water and then pat dry. Bensal HP® Ointment can be applied directly to the wound or placed on dry gauze and then placed on the wound. Wet-Packs or Wet-To-Dry Dressings are not recommended since they will dilute the ointment and decrease its effectiveness. Bensal HP® is designed to provide moisture to the wound.

  Spread a generous quantity of Bensal HP® Ointment evenly over the desired area to yield a thin continuous layer of approximately 1/8 of an inch of thickness. There may be a mild warming sensation, or slight burning, to the treated area for 3-5 minutes after application. If irritation occurs or symptoms persist after 10 days, discontinue use and consult your physician.

  Try to keep the area being treated clean and exposed to air when possible. Apply an appropriate dressing to shield the area from clothes or exposure to water or dirt.

  If there is no improvement in the wound within 7 days, consult your physician for further evaluation of the wound. If there is no response to the ointment at all, then the wound should be re-evaluated for other contributing factors to the wound healing process.

  Close
  More Info