to prepare solution dilute concentrate (1) part concentrate to (10) parts potable water before use
prepare sufficient quantity of constituted eyewash solution in advance of an emergency
mix concentrate with potable water to prepare eyewash solution as follows:
determine quantity of required eyewash solution
follow sanitary procedures
wear protective eyewear and gloves
pour 1/3 of required amount of potable water into mixing container or eyewash unit
add 1/3 of required amount of concentrate to water
agitate or mix thoroughly
repeat until required amount of solution is prepared
properly dispose of empty bottle after use
do not reuse
replace solution no longer than (6) months after mixing
remove contacts before using
twist top to remove
flush the affected eye as needed, controlling the rate of flow of the solution by pressure on the bottle
if necessary, continue flushing with emergency eyewash or shower
do not reuse
once opened, discard
obtain medical treatment
pull handle on the activating door to initiate flow
lower head into flow for 15 minutes
if necessary, continue flushing with emergency eyewash or shower
do not reuse
discard cartridge after use
wear protective eyewear and gloves
follow sanitary procedures
thoroughly clean portable eyewash station and rinse with potable water
use a clean container of sufficient capacity to mix enough solution to fill eyewash station. Solution may be mixed directly in eyewash station
add entire contents of the bottle to the container
fill the station to the manufacturer's required level and mix or agitate thoroughly
date station inspection
station should be cleaned and refilled every 120 days when using this product
properly dispose of empty bottles after use. do not reuse.