Optidyne

USE DIRECTIONS:
Do not use in concentrated form.  Must dilute prior to use.

Dilution:

To obtain a 1% Iodine, 5% emollient solution, add one (1) gallon of OPTIDYNE to three (3) gallons of water and mix thoroughly.

To obtain a 0.50% iodine, 2.5% emollient solution, add one (1) gallon of OPTIDYNE to seven (7) gallons of water and mix thoroughly.

APPLICATION:

Recommended for both pre and post dipping applications.

For pre-dipping with .5% iodine solution:  Make sure udder and teats are visibly clean of any soil.  forestrip each quarter and dip with diluted OPTIDYNE solution.  Wipe teat with towel and then attach milking unit.

For post-dipping:  Dip entire teat in diluted OPTIDYNE.  Allow to air dry.  If solution in cup becomes visibly dirty or cloudy, then replenish with diluted OPTIDYNE solution.  Do not return unused prdouct to original container.

USE DIRECTIONS:
Do not use in concentrated form.  Must dilute prior to use.

Dilution:

To obtain a 1% Iodine, 10% emollient solution, add one (1) gallon of OPTIDYNE 330 to two (2) gallons of water and mix thoroughly.

To obtain a 0.50% iodine, 5% emollient solution, add one (1) gallon of OPTIDYNE 330 to five (5) gallons of water and mix thoroughly.

To obtain a 0.25% iodine, 2.5% emollient solution, add one (1) gallon of OPTIDYNE 330 to eleven (11) gallons of water and mix thoroughly.

APPLICATION:

Recommended for both pre and post dipping applications.

For pre-dipping with .5% or .25% iodine solution:  Make sure udder and teats are visibly clean of any soil.  forestrip each quarter and dip with diluted OPTIDYNE 330 solution.  Wipe teat with towel and then attach milking unit.

For post-dipping:  Dip entire teat in diluted OPTIDYNE 330.  Allow to air dry.  If solution in cup becomes visibly dirty or cloudy, then replenish with diluted OPTIDYNE 330 solution.  Do not return unused prdouct to original container.