Ivermectin Solution label

Ivermectin Solution

Ivermectin Solution Recall

Get an alert when a recall is issued.

Side Effects & Adverse Reactions

There is currently no warning information available for this product. We apologize for any inconvenience.

Legal Issues

There is currently no legal information available for this drug.

FDA Safety Alerts

There are currently no FDA safety alerts available for this drug.

Manufacturer Warnings

There is currently no manufacturer warning information available for this drug.

FDA Labeling Changes

There are currently no FDA labeling changes available for this drug.

Uses

IVERMECTIN (ivermectin) Pour-On applied at the recommended dose level of 500 mcg/kg is indicated for the effective treatment and control of these parasites.

Gastrointestinal Roundworms

Ostertagia ostertagi (adults and L4)

(including inhibited state)

Haemonchus placei (adults and L4)

Trichostrongylus axei (adults and L4)

T. colubriformis (adults and L4)

Cooperia oncophora (adults and L4)

Cooperia punctata (adults and L4)

Cooperia surnabata (adults and L4)

Strongyloides papillosus (adults)

Oesophagostomum radiatum (adults and L4)

Trichuris spp. (adults)

Lungworms

Dictyocaulus viviparus (adults and L4)

Cattle Grubs (parasitic stages)

Hypoderma bovis

H. lineatum

Mites

Sarcoptes scabiei var. bovis

Lice

Linognathus vituli

Haematopinus eurysternus

Damalinia bovis

Solenopotes capillatus

Horn Flies

Haematobia irritans

Treatment of Cattle for Horn Flies: IVERMECTIN (ivermectin) Pour-On controls horn flies (Haematobia irritans) for up to 28 days after dosing. For best results IVERMECTIN (ivermectin) Pour-On should be part of a parasite control program for both internal and external parasites based on the epidemiology of these parasites. Consult your veterinarian or an entomologist for the most effective timing of applications.

Persistent Activity: IVERMECTIN (ivermectin) Pour-On has been proved to effectively control infections and to protect cattle from re-infection with Ostertagia ostertagi,Oesophagostomum radiatum, Haemonchus placei, Trichostrongylus axei, Cooperia punctata and Cooperia oncophora for 14 days after treatment.

History

There is currently no drug history available for this drug.

Other Information

There are no additional details available for this product.

Navigate to :

Ivermectin Solution Recall

Side Effects & Adverse Reactions

FDA Safety Alerts

Manufacturer Warnings

FDA Labeling Changes

Other Information

Trending Topics

Ivermectin Solution Manufacturers

Durvet, Inc.
No Recall
Ivermectin Solution | Durvet, Inc.
Dosage: The dose rate is 1 mL for each 22 lb of body weight. The formulation should be applied along the topline in a narrow strip extending from the withers to the tailhead.

Administration:Squeeze-Measure-Pour System (1 Liter Bottle with 25 mL Measuring Cap)

Attach metering cap to the bottle.

Select the correct dose rate by rotating the adjuster cap in either direction to position the dose indicator to the appropriate dose.

Gently squeeze the bottle to fill to level (any excess will return to the bottle) and then tip and apply to animal along topline.

BackPack (84.5 fl oz/2.5 Liter Pack and 169 fl. oz/5 Liter Pack).

Connect the applicator gun to the backpack as follows: Attach the open end of the draw-off tubing to the dosing equipment. (Because of the solvents used in the formulation, only the Protector Drench Gun from Instrument Supplies Limited, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage).

Replace the shipping cap with the draw-off cap.

Attach draw-off tubing to the draw-off cap.

Gently prime the applicator gun, checking for leaks.

Follow the manufacturer's directions for adjusting the dose.

When the interval between uses of the applicator gun is expected to exceed 12 hours, disconnect the gun and draw-off tubing from the product container and empty the product from the gun and tubing back into the product container. To prevent removal of special lubricants from the Protector Drench Gun, the gun and tubing must not be washed.

Free standing 338 fl. oz./10 Liter bottle and 676 fl. oz./20 Liter bottle

Connect the applicator gun to the 338 fl. oz./10L and 676 fl. oz./20 L bottle as follows: Attach the open end of the draw-off tubing to the dosing equipment. (Because solvents used in the formulation, only the Protector Drench Gun from Instrument Supplies Limited, or equivalent is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage.)

Replace the shipping cap with the draw-off cap and tighten down.

Attach draw-off tubing to the draw-off cap.

Gently prime the applicator gun, checking for leaks.

Follow the manufacturer's directions for adjusting the dose.

When the interval between uses of the applicator gun is expected to exceed 12 hours, disconnect the gun and draw-off tubing from the product container and empty the product from the gun and the tubing back into the product container. To prevent removal of special lubricants from the Protector Drench Gun, the gun and tubing must not be washed.